Allow mixed product to stand (see table) before rolling the coating on to the surface. Pour the contents of A into B and stir thoroughly for at least 3 minutes. Remove all water and allow to dry completely. Rinse thoroughly with fresh water afterwards. Remove oil and grease using a scrubbing brush and ND14 cleaner degreaser. If the floor is previously painted, remove any loose paint by sanding and scraping. They give a decorative finish and will also mask dirt. The chips adhere permanently on the floor when they are sprinkled in the wet coating. The Epoxyshield Decorative Chips are specially designed for use in combination with Epoxyshield Garage Floor Coating. Detailed instructions and a free Instructional DVD.Resists oil, petrol, anti freeze, salt and hot tyre pick up.It can also be applied on sound previously painted floors. The file "Images.zip" contains all cad images and photographs included in this Instructable.Īs usual, I probably forgot a file or two or who knows what else, so if you have any questions, please do not hesitate to ask as I do make mistakes in plenty.ĭesigned using Autodesk Fusion 360, sliced using Cura 3.2.1 and printed in PLA on both an Ultimaker 2+ Extended and an Ultimaker 3 Extended.Epoxyshield Garage Floor Coating can be applied on concrete floors, which are completely clean and dry.
Along with the 3D printed parts, Hummingbird also requires a "uxcell 16mm DC 6V 60RPM Speed Torque Gear Box Electric Motor for Robot" (available from a variety of sources), a 6vdc power source, and four 1/4" or thicker stick on felt or rubber pads (for the base). Hummingbird consists of 97 3D printed parts (38 unique parts) and, as I discovered, requires plenty of time and patience to print, assemble and tune. Hopefully it will bring smiles to many more faces. Hummingbird is a hummingbird themed automata I designed for my wife, who smiles from ear to ear while feeding and watching the gathering hummingbirds at our home.
0 kommentar(er)
